Click image to view full size image
1.75mm Sky Blue PLA Filament For Makerbot Mendel Printrbot Reprap 3D Printer
Brief Characterics:
PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch.
Its extrusion-temperature is much lower than ABS, and most often doesnt require a heated bed.
It has the following features:
· Can be processed at 185 degrees
· Low shrinkage, thermoforming dimensional stability
· Good toughness high strength, high stiffness ;
· No block nozzle, good stick hot bed, a smooth PLA used
· Accurate diameter: 1.75/3.0mm, variations + /-0.03mm, roundness +/-0.02mm
Product Detail:
| Diameter | 1.75mm |
| Weight | 15g/pcs |
| Color | black ,white ,grey , golden , silver , red , orange ,yellow , green ,blue , purple , pink ,fluorescein red,fluorescein green , fluorescein blue , fluorescein yellow , fluorescein orange , sky blue ,skin-color ,transparent , olive green. |
| Length | 5m /roll |
| model NO. | PLA |
| Dimensional accuracy | ± 0.1mm |
| packing | based on customer's request |
| usage | for 3d printer printing |
| Quality | Grade A |
| Gross weight | 20G /pcs |
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind material, and all had achieved the latest REACH certificate.
2, Before the mass production, our&
1.75mm FluoBlue PLA Filament For Makerbot Mendel Printrbot Reprap 3D Printer
